# Installing Windows 10X 195xx (emulator image) on real hardware

Here's some quick notes on installing Windows 10X on real hardware. For this example, we're assuming a system with no other critical disks installed, and a helpful host system being around to set up the initial image.

Prerequisites

Host

Target

Host work

Fetch and mount the emulator image

Make sure you have a clean Flash.vhdx from the W10X emulator. Copy it someplace, and preferably keep another backup as well.

Mount it using PowerShell (as administrator):

Mount-VHD "X:\WCOS\Flash.vhdx"

Check if the emulator image is mounted correctly:

Get-StoragePool -FriendlyName OSPool

This should look like the following:

FriendlyName OperationalStatus HealthStatus IsPrimordial IsReadOnly     Size AllocatedSize
------------ ----------------- ------------ ------------ ----------     ---- -------------
OSPool       OK                Healthy      False        False      127.9 GB      21.81 GB

Gather UpdateApp and verify it works

Start diskpart so you can mount MainOS:

list volume
# select the volume called MainOS
select volume 42
# assuming M: is free
assign letter=m

exit

From the MainOS partition, go and hunt down the following files and drop them in a standalone folder (for example, X:\WCOS\Tools):

\Windows\Servicing

\Windows\System32

Run cmd.exe as administrator, go to the tool directory, and try getting the installed packages on the image:

cd /d X:\WCOS\Tools
updateapp getinstalledpackages

The result should look a lot like the following:

UpdateApp - Update Application for Windows Mobile

[00:00:00] Loaded servicing stack from X:\wcos\tools with session name IUPackageInfoSession_EFIESP
[00:00:00] External storage staging directory is: (null)
[00:00:00] Closing session IUPackageInfoSession_EFIESP
[00:00:00] Loaded servicing stack from X:\wcos\tools with session name IUPackageInfoSession_MainOS
[00:00:00] External storage staging directory is: (null)
[00:00:01] Closing session IUPackageInfoSession_MainOS
164 packages:
        Microsoft-OneCore-HyperV-Guest-UpdateOS-Package~31bf3856ad364e35~amd64~en-US~10.0.19563.1000, UpdateOS
        Microsoft-OneCore-HyperV-Guest-UpdateOS-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, UpdateOS
        Microsoft-OneCore-ServicingStack-UpdateOS-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, updateos
        Microsoft-OneCore-ServicingStack-UpdateOS-UX-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, updateos
        Microsoft-OneCoreUpdateOS-Product-Package~31bf3856ad364e35~amd64~en-US~10.0.19563.1000, updateos
        Microsoft-OneCoreUpdateOS-Product-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, updateos
        Microsoft-Windows-OneCoreUpdateOS-ImageCustomization-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, updateos
        Microsoft-Composable-ModernPC-BootEnvironment-Core-CodeIntegrity-Sbcp-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, EFIESP
        Microsoft-OneCore-BcdBootoption-Package~31bf3856ad364e35~amd64~~10.0.19563.1000, EFIESP
        
        [...]
        
getinstalledpackages completed successfully
command took 7 seconds

If it does, congratulations! You can move on to the next step.

Inject graphics and network drivers

For this example we'll show the Intel HD Graphics driver, but you might need to add more INFs depending on your hardware. If you can't find the right INFs, why are you even doing this?

Place extracted Intel drivers in a directory, so that you have e.g. X:\WCOS\DHCUDrivers\Graphics\iigd_dch.inf. Open iigd_dch.inf, and note down the values for 'Provider' and 'DriverVer'. For me, those were:

Provider=%Intel%
DriverVer=08/23/2019,26.20.100.7158

The provider name is an indirected variable here, so we go and find what %Intel% meant as well. A bit below in the INF, we find the following:

Intel         = "Intel Corporation"

Good! Now, invoke updateapp with the data we've just discovered to install the INF to the BSP partition in your WCOS image:

updateapp install "DriverPackage|X:\WCOS\DHCUDrivers\Graphics\iigd_dch.inf|Intel_Corporation-iigd_dch.inf~amd64~26.20.100.7158~bsp|0"

Note the recurrence of Intel_Corporation and 26.20.100.7518. The installation process will complain with an error code of c0880005 if you get the 'keyform' wrong.

The general rule for inf file names and provider names in the 'keyform' is the following:

After you've installed your favorite driver packages, we can prepare the utility flash drive.

Make a utility flash drive

Gather the following assets into a directory we'll label X:\WCOS\UtilityDrive\Boot:

Partitioning

  1. Connect your UFD.
  2. Open diskpart.
  3. list disk, select disk the right disk, or you'll lose all data on it and will have to do a long partition scan to have any hopes of retrieving your data, and clean + convert gpt.
  4. create partition primary size=5000, format fs=fat32 quick, assign letter=y to make a bootable FAT32 partition.
  5. create partition primary, format fs=exfat quick, assign letter=z to make an exFAT partition to house the VHDX.

Putting things in place

Place your boot drive directory on the drive you called Y:. Dismount-VHD "X:\WCOS\Flash.vhdx in your PowerShell to unmount the VHDX, and copy the VHDX to Z:. You should now have a tree structure similar to:

Y:\
    Boot\
    EFI\
    Sources\
    Tools\
    startup.nsh
    
Z:\
    Flash.vhdx

Eject and unplug the UFD.

Target work

Use your throwaway laptop or other modern enough system with larger-than-128GB system drive. Make sure Secure Boot is off.

Boot Windows PE

Boot it on the target. Really. Once you get into Setup, press Shift-F10 to open a command prompt. Go back and open another, for good measure. Alt-Tab works for switching here.

Copy the VHD (destructive!)

Find out where your USB flash drive is mounted. This will involve doing a lot of the following:

C:
dir
D:
dir
E:
dir
F:
dir

Here, we'll assume the boot volume is D: and the volume with Flash.vhdx is E:.

Open diskpart, and attach the VHD:

select vdisk file=E:\flash.vhdx
attach vdisk readonly
# wait a minute or so
list disk
# if MainOS etc. show up as online, good!

Note down the ID of a 2048 MB disk with a 2048 MB free space, and subtract 1 from it.

  # note: there's no 16
  Disk 17   Online         2048 MB  2048 MB

The ID to note down, therefore, is 16. Also, note down the ID of the target disk (3 in this case).

Wipe it. Yes. That's data loss for you. Make sure you've got backups of anything important on there.

select disk 3
clean
convert mbr
exit

(replacing 3)

Copy the VHDX's content to your disk:

E:\Tools\ddrelease64 if=\\.\physicaldrive16 of=\\.\physicaldrive3 bs=8M --progress

(replacing 16 and 3)

... and go have a hot beverage while waiting for this to hit 131072M.

Rebuild the GPT (for 512-byte disks only)

You probably have a 512-byte disk, so you're going to have to rebuild the GPT. Yay!

Run commands along the following:

> E:\tools\gdisk64 -l \\.\physicaldrive16
[..]
Number  Start (sector)    End (sector)  Size       Code  Name
   1             512            8703   32.0 MiB    EF00  BS_EFIESP
   2            8704        33554426   128.0 GiB   4202  OSPool

Remember the numbers (start, end, code and name) for each partition. Multiply the numbers by 8 (since 4K/512 = 8) - so you get 4096, 69624, etc.

Now, we'll create a new GPT for the target disk:

E:\tools\gdisk64 \\.\physicaldrive3
# accept any warning
x
z

E:\tools\gdisk64 \\.\physicaldrive3
# accept the warning
n
1
4096
69631
EF00

n
2
69632
268435415
4202

c
1
BS_EFIESP

c
2
OSPool

p
# check if it makes sense - matches the above but with different sector numbers
w

Exit all open windows, and your system should reboot.

Boot Windows PE, again

Boot into Windows PE again - not the internal disk you just overwrote. Verify in diskpart if you can list volume and it'll show MainOS etc. without you having attached the VHD.

Remove WCOS Security

In Windows PE, open diskpart and do select volume. Find the volume named ÈFIESP we will assume here its volume id is 6, yours may be different. Then we run select volume 6 and assign. Do list volume again to find the drive letter of EFIESP, in our case it's E:, yours may be different.

Delete the following file: del E:\efi\Microsoft\Boot\SecureBootPolicy.p7b

You may additionally replace winsipolicy.p7b with the one from a desktop sku (the file is located in the same folder).

Boot W10X

OK, now you can boot your internal disk. If you haven't followed the Remove WCOS Security instructions, this will set a Secure Boot policy value, however, so you'll have to boot your utility flash drive again if you want to boot any other Windows media (or otherwise execute the dmpstore command).

If everything's right, you should be booting into Windows 10X, and your graphics adapter might even be working.